If the recovery partition in HP/Dell computer is deleted or overwritten somehow, you can’t access the recovery partition with F11 key. That means, the F11 system recovery not working problem occurs. On the other hand, you cannot boot up your computer and cannot do the system recovery.

How to get HP/Dell restore to factory settings or previous state when F11 doesn’t work?

F11 System Recovery Knowledge

For some brand computers, the manufacturer of these computers designs a special key or key combination to do their system recovery. As for Dell, HP or Lenovo computers (PCs, notebooks, desktops), the F11 key is the pivotal key to recover system to computer default settings when your computer corrupted due to hardware or software failure.

HP computer provides a built-in tool named HP Backup and Recovery Manager to recover your system to the original factory-shipped state, the recovery partition is needed. If your HP computer has some issues that you want to restore it to factory settings, turn on HP computer and immediately press the Esc key to display the Startup Menu, and then press F11 to access the HP system recovery.

Generally, Dell computers have a recovery partition that you can access to recover and restore your computer to factory settings. How to access Dell recovery partition? Boot your Dell computer, press Ctrl+F11 when the Dell logo appears, then follow the instructions to restore.

How to Solve F11 System Recovery Not Working Issue in Windows 7/8/10?

If your F11 key not working for system recovery, don’t worry, there are some solutions for you to fix F11 system recovery doesn’t work problem with the following 2 ways:

• Reinstall your Windows OS with the Windows Installation disc.
• Factory reset your computer with HP recovery disc (it will take 4-6 hours). You may need to backup data first.

Effective Preventive Measure – Backup Your Windows First

Compared with these two ways, backup your Windows system and recovery for HP/Dell computer is the ideal method. Luckily, you can backup system with AOMEI OneKey Recovery at ease and reset F11 as shortcut for system recovery in Windows 7/8/10.

The detailed steps to solve F11 not working are listed below:

1. Click on OneKey System Backup on home console.

2. Choose Backup system to AOMEI OneKey Recovery Partition(Recommended), and hit Next.

Tip: You could encrypt and compress the backup image with Backup Options.

3. Select an existing partition to allocate a required amount of free space (the free space should larger than the used space of system partition C: drive) for creating AOMEI OneKey Recovery Partition, and click Start Backup>>.

Tip: The backup progress will automatically create an AOMEI OneKey Recovery Partition, where a system backup image (suffix with .adi) is saved. This partition is hidden by default to prevent data from damaging.

4. After a few minutes, the system backup will be finished, showed like this. Then, click OK.

5. Click the Settings icon at the top right corner to set the F11 or A key as the shortcut to onekey system recovery, choose F11. Then the F11 system recovery not working problem will be solved easily and quickly.

Now, you can see these partitions created by AOMEI OneKey Recovery in Disk Management, like this:

Tips:

• For GPT disk, you will get two partitions: AOMEI (boot partition) and AOMEI Recovery Partition (contains system image file suffix with .adi), all these partitions are hidden by default.
• For MBR disk, you will get only one AOMEI Recovery Partition.
• This powerful software also applied to other brands computers, like HP, Lenovo, Acer, Dell, Toshiba, HP and IBM, etc.
• The program supports all editions (32-bit and 64-bit) of Windows operating system, like Windows XP, Vista, 7, 8, 8.1, 10 and Windows Server 2003/2008 (R2)/2012 (R2)/2016, SBS 2003/2008/2011, WHS 2011.

Now, you could use F11 key to restore your system to factory settings or previous state.

Another Effective Preventive Measure

As a matter of fact, you could create a system backup image with AOMEI Backupper Standard to external hard drive with your computer before problems occur.

If the system crashes or other unbootable issue shows up, create bootable media to boot your computer, and then use this backup image to restore your computer.

This way only applies to preparation before problems occur. Planning ahead is the best solution.

Create System Backup Image:

1. On the main window of AOMEI Backupper Standard, select Backup, System Backup in turn.

2. Enter a proper Task Name into the box.

3. Choose the external hard drive as the destination to save the system image and click Next.

Tips: The program will select the system partition associated with system files automatically.

4. Press Start Backup.

Restore Your Computer with the System Image:

1. Connect your external hard drive with your computer and boot up your computer with the bootable media created by AOMEI Backupper Standard. Then, click Select Task under the Restore tab.

2. Then choose a backup image and click Next to move on.

3. Tick Restore this system backup or Restore a partition in this system backup and click Next. After that, preview the result of restoring, click Start Restore.

The post Fixed: F11 System Recovery Not Working in Windows 7/8/10-Micro PC Service appeared first on Micro PC Service LLC.

HP Recovery Manager is a software program offered by HP to help users maintain their computer system. It can be used to backup personal files and return the computer to a previous state. It can also help to create HP recovery media and remove recovery partition, etc.

Depending on the model of your computer and its configuration, your Recovery Manager screen might vary. It should be noted that HP Recovery Manager does not come preinstalled on Windows 10 computers beginning in 2018. Therefore, you may get HP Recovery Manager downloaded on Windows 10 if you don’t have it but still want to use it.

How to perform a system recovery using HP Recovery Manager?

Please backup important files and read all caution statements before performing a system recovery. In this case, I’ll show you how to reinstall the original factory image on the system partition when Windows loads correctly.

Tip: If Windows 10 cannot start correctly, you can run system recovery from the recovery partition using F11. Or you can restore system image with HP supplied recovery media or the media you created.

1. Turn off the computer and disconnect all connected devices and cables except the monitor, keyboard, mouse, and power cord.

2. Turn on the computer. Type “recovery manager” in the search box of the taskbar. Then, select HP Recovery Manager from the search results.

3. In the HP Recovery Manager window, click Windows Recovery Environment under Help.

4. Click OK to let the system reboots into the Windows Recovery Environment.

5. Select Troubleshoot > Recovery Manager in order.

6. Select Recover without backing up your files and click Next if you have backed up your files. Otherwise click Back up your files first (recommended).

7. Read the System Recovery information and click Next to proceed.

8. Wait until the recovery preparations are complete. Then, click Continue. After the computer restarts, follow any on-screen instructions to finish the process.

HP Recovery Manager offers easy backup and recovery solutions for HP computers. However, errors occur sometimes. For example, some users receive an error message “Can’t open file: X:\sources\Recovery\tools\HP\Rita-tool\” when opening Recovery Manager and some users find F11 system recovery not working. Are there reliable HP Recovery Manager alternatives? Please move on to the next part.

Alternatives to HP backup and recovery manager in Windows 10

If you are looking for HP recovery software in Windows 10 that is equivalent to HP Recovery Manager, you can turn to Windows 10 built-in feature Reset this PC or a third-party backup and recovery tool.

Repair Windows 10 computer via Reset this PC

The best part of the Reset this PC feature is that it allows you to reinstall Windows 10 while either preserving your personal data or removing everything. You can make a choice depending on your situation. Follow the guidance below to perform a system reset:

1. Search for Reset this PC from the search box in the taskbar and open it. In the pop-up window, click Get started under Reset this PC.

Tip: If your computer cannot boot into Windows correctly, you can restart your computer and immediately press the F11 key repeatedly. Then go to Troubleshoot > Reset this PC.

2. Choose to either Keep my files or Remove everything. Both options will reset Windows to its default state and remove your installed applications and settings. The difference is that whether to erase your personal files.

3. You’ll get to different windows based on your choice in step 2.

3.1. If you choose Keep my files, wait for Windows to get things ready and click Reset. You can check what apps will be removed by clicking “List of apps to be removed”.

3.2. If you choose Remove everything, you can do additional configurations. The default setting is only removing files from the drive where Windows is installed. It will not clean the drive nor will it remove files from other drives if your PC has more than one drive.

• Click Next if you want to keep the default setting.
• Click Change settings and you can choose to clean the drive and remove all files from all drives by turning on the corresponding switch. Click Confirm to affirm your settings and then click Next.
• Click Reset to begin the reset process.

Restore HP computer to factory settings using AOMEI Backupper

The best free backup and restore software – AOMEI Backupper Standard can also do you a favor when HP Recovery Manager comes into errors, and it can do much more.

• It can not only help you backup files on your HP computer but also backup different system states or a specified disk or partition.
• It allows you to schedule backups to run automatically so that new changes won’t be missed.
• When performing system restore, you are allowed to restore system image to either the original location or a new location.
• It enables you to create a recovery environment or bootable media to boot your computer in case Windows fails to start.

Wanna have a try? Click the button below to download HP Recovery Manager alternative right now.

Please note that AOMEI Backupper can only restore from the image files created by itself. As a result, to restore HP computer to factory settings via AOMEI Backupper, you need to backup the computer system once you get the computer.

★ Create a system image for your HP computer

Run AOMEI Backupper. Click Backup and select System Backup. Follow the wizard to complete the process. You are suggested to backup Windows 10 to an external hard drive or a network location.

 Restore HP computer to factory settings

1. Launch AOMEI Backupper. Under the Home tab, you’ll see all the tasks you’ve created with AOMEI Backupper. Find the system backup task and click Restore from the expanded menu.

2. Select Restore this system backup to restore all partitions that have been backed up, including C drive, system reserved partition/EFI system partition, etc. Then click Next.

3. Confirm operations on the “Operation Summary” page and click on the Start Restore button.

4. You will receive a prompt reminding you to restart your computer. Click Yes to continue. The operations will be completed under the Restart Mode.

The post Stepwise Guide to HP Recovery Manager on Windows 10-Micro PC Service appeared first on Micro PC Service LLC.

WSB can only backup partitions that is NTFS formatted. If you open Disk Management, you will see a 2GB FAT32 partition labelled as OS. The OS partition is probably from Dell initial setup.

If you want to create a backup including system image, this OS partition will be included because its status is Healthy (System, Active, Primary Partition). Therefore, you will receive the error backup volume have unsupported file system.

Skip the partition

The simple solution is to skip this partition by creating a custom server backup. If you want to create a system backup, you can just select system state, system reserved partition and C: drive on MBR disk. If you system is on a GPT disk, you need to select system state, EFI system partition and C: drive.

Delete the partition

You can delete the 2GB system partition in Disk Management or DiskPart.exe. It is recommended to deactivate the partition before deleting it because there are chances that you may not be able to reboot the machine. When it fails to boot, you can ran a system repair to surely fix it.

Switch backup software

To fix this problem, you can also use third party backup software that supports FAT32 partition backup besides NTFS. If you need easy server backup software that to protect your server, AOMEI Backupper Server should be a good choice.

AOMEI Backupper supports many file systems including NTFS, FAT32, FAT16, EXT2, and EXT3. It provides system backup, disk backup, partition backup and file backup to meet your common backup needs. The backup with AOMEI Backupper is safer and more secure because it uses block by block backup.

Main features:

Universal restore: restore system to another machine with dissimilar hardware.

Schedule backup: automatically backup your server at a specific time or on a certain event.

Incremental and differential backup: backup only changed and new added files.

Explore image: browse the items in the backup with Windows File Explorer.

Create bootable media: make a bootable disk or CD to restore unbootable machine.

Email notification: notify you when a backup is performed.

Disk/system clone: copy hard drive or system without imaging.

If you use this backup software to create backups, you will not receive the volume OS have an unsupported file system error at the firsthand. Now you can free download the 30-day trial version to get started.

The post Volume(s) OS Have an Unsupported File System-3 Ways to Fix-Micro PC Service appeared first on Micro PC Service LLC.

Staying at the forefront of innovation and the computing experience, Dell laptops, desktops and tablets are favored by a number of users. In spite of the superb performance brought by the original hard drives, some users encounter following situations:

Case 1: “Hi I just got a new laptop and I would like to upgrade it to a SSD 1TB but how do I transfer my data and OS to the new SSD when I get it.”
Case 2: “Diagnostics is telling me that my hard drive is failing. I intend buying a new SATA drive but larger capacity. I am on Windows 10. What is the simplest way to copy/clone the whole drive, OS and all, onto the new drive and then slip the new drive back into the laptop as if nothing has changed!”

As you see, it is necessary to clone Dell laptop hard drive when you want to replace laptop HDD with SSD or another drive with larger capacity. And you may prepare a cloned drive for instant replacement in case that the current hard drive refuses to work some day. Then, how to clone Dell hard drive safely and efficiently? Please read on.

How to clone Dell laptop hard drive in Windows 10/8/7?

Here I’m going to show you top two ways to clone Dell laptop hard drive in Windows 10/8/7. If you plan to upgrade your Dell hard drive to a Samsung SSD, you can follow method 1; if you prepare to clone to other SSD brands, method 2 is applicable.

Method 1: Clone Dell hard drive to SSD using specific cloning software

Although Dell doesn’t provide users with Dell hard drive cloning software, some SSD manufacturers offer disk cloning software to help users upgrade HDD to SSD, such as VisionTek USB 3.0 Universal SSD Installation Kit, Samsung Data Migration and so on. Let’s take Samsung Data Migration for example. Learn how to clone Dell laptop hard drive to a Samsung SSD below:

1. Connect the Samsung SSD to your computer and ensure it is recognized. Download and run Samsung Data Migration.

2. The drive with OS installed will automatically be selected as the Source Drive. Select the Samsung SSD you just connected as the Target Drive. If you don’t see your SSD, click the Refresh button at the right bottom and try again.

3. Select additional volumes that you wish to clone besides the C: volume. You can select at most two more volumes.

4. Click on Start to begin the migration process. Once the cloning process is complete, the computer will shut down automatically within 20 seconds. Replace the old hard drive with the new Samsung SSD and you will get the system and all your data back instantly.

Simple as it looks like, errors occur sometimes—users are confronted with Samsung Data Migration cloning failed, Samsung Data Migration access violation and the like. Additionally, these utilities only support SSDs of the corresponding manufacturer. Is there such cloning software that fits all? The answer is YES.

Method 2: Clone Dell hard drive to SSD via an all-around freeware

AOMEI Backupper Standard, the best backup software for free, comes to help. With the Disk Clone feature, you can copy old hard drives to SSDs of all common brands, including Samsung, Crucial, PNY, WD, etc. You can also copy a specific partition using Partition Clone. 

What’s more pleasant is that it offers an option called SSD Alignment which will help to improve the reading and writing speed of the destination SSD. All Windows PC operating systems like Windows 10/8.1/8/7/Vista/XP are supported. Before you start, please do the following preparations:

Step 1. Connect the target SSD to your computer and make sure it is detected. Launch AOMEI Backupper, click “Clone” on the left pane and select “Disk Clone”.

Step 2. Select the current hard drive as the source disk and click “Next”.

Step 3. Select the destination SSD you have connected to your computer and click “Next”.

Step 4. Tick “SSD Alignment” to optimize the performance of the destination SSD. Confirm the operation and click “Start Clone”.

Step 5. Shut down your computer and replace the current hard drive with the cloned SSD. You may use a Phillips #0 screwdriver to remove the original hard drive.

The post Top 2 Ways to Clone Dell Laptop Hard Drive Without Reinstalling OS-Micro PC Service appeared first on Micro PC Service LLC.

Intel data migration software not cloning, how to fix?

Hi, I’m trying to clone my hard drive (HDD) to the Intel SSD wiht the Intel Data Migration Software, but it won’t let me. It said ‘the size of one or more of the partitions is too small, please specify the size manually’, when i try to continue with the process, it just say Operation failed, what should i do, please help, Thanks.

Intel Data Migration Software is designed for Windows users to move data from a hard disk drive (HDD) to an Intel Solid State Drive (SSD), like Intel SSD 750 series, Intel 730 series SSD, etc, and you should know that the Intel Data Migration Software cannot work with other brands of SSDs.

Note: Intel Data Migration Software has been discontiuned since December 31, 2020.

Intel Data Migration Software Errors

Meanwhile, you might get the following Intel Data Migration Software not working error messages or signs while cloning with Intel Data Migration Software:

• The operation failed. Remove all administrative profiles set up on your system.
• Intel Data Migration Software not detecting SSD drive. Check the connection between montherboard and the Intel SSD, make sure the SATA to USB cable connect well.
• Full disk encryption. Make sure disable full disk encryption before cloning to avoid this error.

The above errors could be caused by improper file system, because the Intel SSD (target drive) should be initialized as GUID Partition Table (GPT) and formatted as New Technology File System (NTFS).

How to fix Intel Data Migration Software not cloning?

Follow the steps to fix improper file system in Windows 7/8/10 to check errors for all partitions on the Intel SSD:

• Right click Computer -> Properties;
• Choose Disk Management, click the Intel SSD drive letter and select Properties -> Tools;
• At the Error-checking option, please press Check Now button.

Then try the Intel Data Migration Software again to see if the problem solved.

What if Intel Data Migration Software not working problem still bother you? Is there any better Intel Data Migration Software replacement to migrate data from HDD to Intel SSD or other brands SSD?

Best Intel migration software – AOMEI Backuper

The answer is definite. The Intel SSD migration tool – AOMEI Backupper Professional is a powerful SSD cloning software to migrate data from HDD to SSD without losing data in Windows 7/8/10, which is reliable and flexible than Intel Data Migration Software, not only for Intel, but also for Lenovo, Samsung, Dell, Acer and other brands of computer.

It’s highly recommended by millions of users due to its excellent performance and comprehensive functions.

The Intel SSD clone tool – AOMEI Backupper Professional benefits you from the following aspects:

• Migrate OS from HDD to Intel SSD if the Intel SSD is smaller than source HDD.
• Enables you clone large HDD to smaller Intel SSD using intelligent clone mode, which is the default settings.
• Clone entire hard drive to Intel SSD with everything transferred.
• Accellerate the reading and writing speed for Intel SSD with SSD Alignment.

Please download the Intel Data Migration Software replacement – AOMEI Backupper Professional 30-day free trial to have a try: (The Clone features in free trial can be demonstrated only, please upgrade to unlock)

Steps to migrate OS to Intel SSD with Intel SSD clone tool

How to migrate OS to Intel SSD safely in Windows 10/8/7? Just follow the instructions to perform Intel SSD migration easily:

1. Connect the Intel SSD drive with your computer motherboard via SATA to USB cable. Select “Clone” > “System Clone” in turn.

2. Select the Intel SSD as the destination disk to save the Windows system image. Then press “Next“.

3. Preview the settings of the Intel SSD clone operation, Tick “SSD Alignment” option, and press “Start Clone” to migrate OS to Intel SSD in Windows 10/8/7.

The post Fixed: Intel Data Migration Software Not Cloning Problem-Micro PC Service appeared first on Micro PC Service LLC.

If you are planning to replace old hard drive or SSD with SK Hynix SSD, you may be concerned about how to handle the operating system and previous data. In fact, with proper SK Hynix clone software, you can migrate them from the old disk directly without reinstalling.

Overview for SK hynix SSD migration tool

SK hynix partners with Macrium to provide a data migration tool – SK hynix System Migration Utility. It can quickly transfer Windows OS and user data to SK hynix Solid State Disks (SSD) while auto resizing partitions to fill the cloned disk and aligning them for optimum SSD performance.

You can install the SK hynix SSD to your computer and download this tool from the official page. Then, follow a simple wizard to select the source disk and target disk, confirm the operation and start cloning. Learn detailed steps with screenshots in this user guide.

SK hynix System Migration Utility failed

In general, this SK hynix SSD migration tool is easy to use and has basic data migration functions. But there are still some complaints mainly about 3 types of issues: SK hynix device cannot be found; system won’t boot from the cloned drive; transfer speed too slow. I’ve excerpted a few representative comments here:“I tried several times to clone my current boot drive but I could not get my system to boot. I kept getting a blue screen saying the application or operating system couldn’t be loaded because a required file is missing or contains errors.”
“1TB HDD with 4 partitions but with only about total of 150GB used content took over 16 hours to transfer them over to the new 500GB SSD.”
“Had to download somebody else’s data migration software because the “free” SK hynix software kept saying it couldn’t find a SK hynix device, even after initializing/formatting the SSD.”

In addition to above issues, a SK hynix disk is required for this SK hynix gold cloning software to function. So if you want to migrate data between other HDDs or SSDs someday, you will need to find another migration tool.

In response to these situations, I would like to introduce another disk clone software with broader application scope and more powerful data migration capabilities as alternative.

Best SK hynix clone software for system or data migration

As technology evolves, people tend to get better performance by replacing hard drives, like from HDD to SSD, SATA SSD to NVMe SSD, etc. In this process, a disk clone software is necessary if you don’t want to lost previous data and reinstall Windows from scratch.

For example, the freeware AOMEI Backupper Standard is a good choice with its complete cloning features. It works for all Windows OS and all hard drive brands. You can use Disk Clone to migrate an entire HDD/SSD including the OS and all the data, or use Partition Clone to copy an individual partition to target disk.

With the intelligent cloning mode, you can copy only used sectors and therefore clone larger HDD to smaller SSD. If the target disk is larger, you can also perform Sector by Sector Clone to create an intact copy of the source disk.

Also, you have the SSD Alignment option to accelerate the reading and writing speed of the cloned SK hynix SSD.

If you want to migrate only OS to target SSD and keep all the files on the old hard drive, you can upgrade to Professional edition to use the System Clone feature.

Also, the Standard edition supports cloning system disk from MBR to MBR, if you want to clone GPT to GPT, GPT to MBR or MBR to GPT, please use the Pro edition. 

How to migrate hard drive to SK hynix SSD | step by step

Preparations:

Delete unwanted files and apps on the old hard drive.

Connect the SK hynix SSD to the PC properly. If there’s only one slot, you can connect it via a SATA to USB adapter.

Download and install the disk clone software.

Steps to migrate OS and all the data to SK hynix SSD:

1. Navigate to Clone tab and select Disk Clone. If you only want to transfer OS to another hard drive, use System Clone (supported by advanced edition) instead.

2. Select the source disk and the target SK hynix SSD respectively, click Next to continue.

3. Check the option SSD Alignment to accelerate the writing & reading speed of target SSD, click Start Clone.

How to boot from the cloned SK hynix SSD?

If you won’t use the old hard drive any more, you can directly replace it with the SK hynix SSD, thus the system shall start from it automatically.

If you want to keep the old hard drive as a secondary storage drive, then you can restart the computer, press a specific key (depending on the manufacturer) to enter BIOS, select the SK hynix SSD as the first boot option, then press F10 to save the setting and exit.

Note if you cloned a SATA drive to SK hynix Gold P31 M.2 NVMe SSD, you may need to change legacy boot mode to UEFI, because a NVMe SSD will only boot in UEFI mode. You could refer to clone SATA to NVMe.

After booting from the cloned SK hynix drive, you could use the Disk Wipe feature of AOMEI Backupper to erase the Windows system partition, or the entire old hard drive.

The post Best SK Hynix SSD Clone Software for OS and Data Migration-Micro PC Service appeared first on Micro PC Service LLC.

The Windows Server Backup (WSB), built-in backup utility of Server 2012 (R2), allows its users to create backup for current operating system (OS). For example, image Windows Server 2012 to new hard drive for protection. However, the Windows Server 2012 backup types providing by Backup Schedule Wizard are only “Once a day” and “More than once a day”. In other words, it cannot back up in a lesser frequency like weekly or monthly.

Nevertheless, there are cases for users who want to perform a weekly backup on Server 2012. In general, the situations are:

• Reducing backup frequency as the server is already protected by a Database Availability Group.
• Windows Server 2012 backup multiple schedules. For instance, files and folders are backed up daily but you want to create a lesser frequency backup for system state drive.
• Some certain disks like external hard drives are added weekly. Therefore, a daily backup task will cause “Backup failed” error six times a week.

Fortunately, you can complete weekly backup in Windows Server 2012 in other ways. Two most used ways will be introduced below.

Windows Server 2012 backup once a week with Task Scheduler

Except for Task Scheduler, you’ll also need the help of Windows Server 2012 Wbadmin commands in this part.

1. Go Server Manager > Dashboard > Tools > Task Scheduler.

2. In Task Scheduler click “Create Task” under the “Actions” tab on the right side.

3. In the Create Task window, name the task in General tab if you want to. Meanwhile, switch the option to “Run whether user is logged on or not” under Security options.

4. In Triggers tab click on the “New” button. Then, specify the day in a week (or in a month) to run the backup.

5. In Actions tab click on the “New” button as well. Here is the step where you input the wbadmin commands. Type it in the pane next to “Add arguments (optional)”. For example, to back up the entire C: drive including all critical volumes to the H: drive, please write this command:

start backup –backupTarget:H: -include:C: -allCritical -quiet

Descriptions:

• start backup: start the wbadmin.exe
• -backupTarget: the target volume to store the backups.
• -include: the volume(s) to backup. To backup more than one volume, separate them with a comma.
• -allCritical: tells the backup program also includes any other data that are required for a full server recovery.
• -quiet: to perform unattended backup tasks.

6. You can also configure other settings in the left “Conditions” and “Settings” tabs as you wish. Then, click OK. Note that you’ll be prompted to enter a user password after.

Surely, you can make a script batch file from Command Prompt (Windows PowerShell) and let Task Scheduler to execute it. For example, to back up system state drive on every Saturday (SAT) at 18:00 using CMD, you need to input:

SCHTASKS /CREATE /SC WEEKLY /D SAT /TN WeeklySystemStateBackup /RL HIGHEST /ST 18:00 /TR “Wbadmin start systemstatebackup –backupTarget:H: -include:C: -allCritial -quiet”

Descriptions:

• SCHTASKS: scheduler tasks.
• /Create: create a task.
• /SC: schedule.
• /D: the day in a week to run.
• /TN: task name.
• /RL: run level.
• /ST: start time.
• /TR: trigger.

If the Windows Server Backup Scheduler not running as expected or the Task Scheduler does not start properly, you can manually start the task to see if it works. If not, check if the task is set to run whether user is logged on or not, or check if the wbadmin command is correct.

For users who are familiar with Windows Server Task Scheduler or Command Line Interface, they may find it is very convenient to let Server 2012 backup weekly. However, for common users, these methods are way too complex and error-prone, too.

In addition, only partitions formatted with NTFS file system can be included in the backup, and the critical volumes are not possible be set as the backup target location. Worse, scheduled backup on network share will only be completed with full backups instead of incremental or differential backups. Under such circumstances, you may want to turn to third-party server backup tools to complete weekly backup tasks in easy steps.

Windows Server backup weekly via easy-to-use server backup software

AOMEI Backupper Server, professional yet easy-to-use server backup software, allows you to backup Windows Server 2012 weekly with its own services or Windows Task Scheduler. It has a graphical user interface that helps you create weekly backup tasks in a few clicks. Partitions that are not formatted with NTFS can be backed up. The backup target location is not limited as well.

To demonstrate how the software back up Windows Server 2012 step by step, following will take system backup as an example.

1. Download 30-day free trial in the first place. Install and run AOMEI Backupper on Server 2012.

2. In the main console click “Backup” and then “System Backup”.

3. As you can see, the needed volume(s) is (are) selected by default. Now, you need to select the target location and edit task name as you wish. You can back up to local disk, external storage, NAS, network share, etc.

4. Click “Schedule” beneath and select “Weekly” in the General tab. Then specify the day and time to back up. Click “OK”.

Tips: The scheduled backup will run in the way of incremental backup by default. You can change it to full backup or differential backup in the “Advanced” tab.

5. (Optional) Select a backup strategy from “Scheme” to automatically delete obsolete backups to save disk space while keeping backups up-to-date.

6. Finally, click “Start Backup” to run or add the task after your confirmation.

The post Set Windows Server 2012 Backup Schedule Weekly Step by Step-Micro PC Service appeared first on Micro PC Service LLC.

Windows 10 is the latest version of Microsoft operating system for desktop computers, laptops, tablets, etc. It provides some amazing features and functions to promote the performance of computer, including Tablet Mode, Sticky Notes, universal applications, music controls in lock screen and more.

Although Windows 10 is the fresh blood of Microsoft, it is so controversial, many users complain about the unstable function, old fashioned interface, and privacy information might leak. So many people plan to rollback Windows 10 to Windows 7.

Rollback Windows 10 to Windows 7 via “Go back to Windows 7”

When you upgrade Windows 7 to Windows 10 without formatting hard disk, the system will create a folder automatically named Windows.old to save the previous version of Windows, and this folder is used to revert back to Windows 7 from Windows 10.

If you don’t want to stay with Windows 10 due to some reasons, you could use the Windows.old folder to downgrade from Windows 10 to Windows 7 within a month. Here are the steps: Settings > Update & security > Recovery > Go back to Windows 7.

However, the Windows.old folder will be deleted automatically by Windows after 30 days you upgrade. So you can’t downgrade Windows 10 to Windows 7 when the Windows.old folder is lost. But don’t worry, in the next part, we will tell you other two methods to rollback Windows 10 to Windows 7 after 30 days.

How to Downgrade Windows 10 to Windows 7 without Losing Data After 30 Days

Important Notice: Indeed there are two workaround methods that can help you go back to Windows 7 from Windows 10 after 30 days, but it’s possible you will lose all the existed data. So before you try the following methods to downgrade Windows 10 to Windows 7, please make a backup in advance.

One powerful Windows backup software, AOMEI Backupper Professional provides various and convenient functions to manage your data, including system backup, partition backup, disk backup, system restore, system clone, partition clone, and so on.

Besides, AOMEI Backupper allows you to backup your data to network share, NAS device, USB flash drive, external hard disk, internal hard disk, etc. Before doing it, download AOMEI Backupper for you.

1. To backup your computer, you can use the “Disk Backup” feature to backup all the data on the hard disk to another hard disk or SSD drive. Launch the AOMEI Backupper, on the main console, select “Backup”> “Disk Backup“.

2. Type a name in “Task Name” box, select the source disk and destination disk, then hit “Start Backup”.

Now you have made a backup for your computer, and you can restore the backup to Windows 7 anytime you want. Next, we will tell you how to go back to Windows 7 from Windows 10 after 30 days.

Method 1. Restore to Factory Settings

Many laptops come with a recovery partition and you can set the computer back to original factory settings using their specialized utilities, such as Acer eRecovery Management, ASUS Recovery Partition, Dell Factory Image Restore, Lenovo OneKey Recovery, HP PC System Recovery, or Sony VAIO Recovery Wizard. If your computer has this media, you can choose to restore to factory settings. Normally, press Ctrl+F11 at boot time will initiate the recovery procedure.

Some other brand computers may not have the built-in tools to make it. But you can still have a try if you have updated Windows 10 only once: just update Windows 7 to Windows 10. You can try to uninstall and delete Windows 10 to downgrade Windows 10 to Windows 7 after 30 days. Go to Settings > Update & security > Recovery > Reset this PC > Get Started > Restore factory settings.

Method 2. Perform A Clean Restore

Reinstalling Windows 7 may be the most straightforward solution to go back to Windows 7 from Windows 10 after 30 days. And you need to download installation media if you do not have one.

1. Boot from the Windows 7 DVD or USB device and wait for Windows 7 Setup to finish loading > Choose Language and Other Preferences.

2. Click the Install now button.

3. Accept the Windows 7 license terms and choose the Type of Windows 7 Installation to Complete.

4. Set the advanced drive options and choose a location to install Windows 7 on. Then wait for the process done.

Both the above two methods will erase the existed data on your computer. So please remember to make a backup with AOMEI Backupper before you try to downgrade Windows 10 to Windows 7. When you have successfully rollback to Windows 7, you can restore the backup to your computer.

By the way, to avoid such problem in the feature, you can also create a Windows 7 system image backup with AOMEI Backupper’s System Backup function and then you can revert to it whenever you want. On the main window, select “Backup”>”System Backup”; enter a name in “Task Name” box; select the destination partition to save the data on source partitions; the program will choose system partition automatically; then click “Start Backup”.

The post Rollback Windows 10 to Windows 7 without Losing Data [2 Ways] : Micro PC Service appeared first on Micro PC Service LLC.

File transfer is a frequent operation for most computer users. We transfer files between different folders, drives and even computers in order to backup files or share files in different places. You may find it necessary to transfer files from Windows 7 to Windows 10 over network in following occasions:

• You buy a new computer with Windows 10 preinstalled while your old computer is running Windows 7. Your want to transfer files from the old computer to the new computer without a specified transfer cable.
• You want to share files with your friends or colleagues from Windows 7 to Windows 10 when your computers are connected to a common wireless or wired network.

Then, how to realize Windows 7 to Windows 10 file sharing over network? Please move on to the next part.

Easily transfer files from Windows 7 to Windows 10 over network

Before you start network sharing between Windows 7 and Windows 10, make sure your computers are under the same wireless or wired network. Now learn two efficient ways to finish the task below:

Method 1: file sharing over network with Windows built-in tool

1. Locate the folder you want to share on the Windows 7 computer and right click on it. Choose “Share with” and then select “Specific people…”.

2. In the file sharing window, choose people to share with using the drop-down menu and click “Add”. You can choose to share with “Everyone”, which means the files will be accessible on your local network to anyone even if they don’t have a password.

3. Click the user you just added on the list, set permissions for it and click “Share”. When you see “Your folder is shared”, click “Done”.

4. Keep the Windows 7 computer on and access the shared folder on the Windows 10 computer. Find the Windows 7 computer’s name in the Network section on the Windows 10 computer. Double click the name to open it, and the shared folder is located there. You can copy the shared folder to anywhere else based on your needs.

 Notes:

① Shared items will be inaccessible when the Windows 7 computer is asleep.

② If you have trouble accessing shared items on the Windows 10 computer, please go to Network and Sharing Center > Change advanced sharing settings and change the following options for both the systems:

• Turn on network discovery
• Turn on file and printer sharing
• Turn on sharing so anyone with network access can read and write files in the Public folders
• Turn off password protected sharing

As you see, you can only share one folder at one time. It will be time-consuming if you have dozens of files from different folders to transfer. Is there a superior tool to make it simple?

Method 2: file sharing over network by a handy freeware

AOMEI Backupper Standard, the best free file sync software for Windows 10/8.1/8/7/Vista/XP, can help you with fast file transfer from Windows 7 to Windows 10 over network. You can benefit a lot from the File Sync feature of AOMEI Backupper:

• It allows you to transfer files between different locations, such as from one folder/disk/computer to another folder/disk/computer. You can also sync local folders to OneDrive, Google Drive, and Dropbox, etc.
• It supports transferring multiple folders simultaneously, saving you from repetitive work.
• It enables you to create automatic sync tasks with the Schedule feature.

Learn how to do network sharing in Windows 7 via AOMEI Backupper below:

1. Download, install and launch AOMEI Backupper on the Windows 7 computer. Click “Sync” on the left pane, and select “Basic Sync”.

2. Name the task so that you can distinguish it from other sync tasks. Click “Add Folder” to choose the folder you want to transfer.

3. Click to select the destination. In the pop-up window, select “Share/NAS”.

4. In the Network Location Management window, click “Add Share or NAS Devices”, type the IP address of the Windows 7 computer and click “OK”. Type username and password if it prompts.

5. After the IP address has been added, all network-shared folders under it will be listed. Choose one folder as the destination path and click “OK”.

6. Click on “Start Sync” button to perform the operation.

7. Access the shared folder(s) on the Windows 10 computer as mentioned in Method 1.

The post How to Transfer Files from Windows 7 to Windows 10 over Network – Micro PC Service appeared first on Micro PC Service LLC.

HP (Hewlett-Packard) has been working on building a reputation for high-end laptops for many years. HP laptops are known for their wide selections and excellent reliability. Even if you use such an advanced device to store your files such as documents, photos and so on, you may suffer from data loss.

When viewing and modifying files, you may accidentally delete them. Other risks, such as hard drive corruption, power failure or system crash can also cause your files to be lost. What’s worse, these files are not found in the recycle bin.

If you have already backed up HP laptops in Windows 7, you can restore them in time. But for various reasons, you didn’t prepare a backup. In fact, they are not immediately destroyed, but just marked as inaccessible and invisible files. You still have chances to recover deleted files from HP laptop.

How to recover deleted files from HP laptop?

Once files are deleted, do not write any new files on your HP laptop as this may greatly reduce your chances of recovering deleted files. Then use the following strategies to get your files back.

Way 1: Recover deleted files via HP Recovery Manager

Many HP laptops come with a free application that allows HP users to backup and restore files. You’ve probably guessed it – HP Recovery Manager. If you have already backed up files with this HP laptop data recovery program, then you can restore them by following the steps below.

Step 1. Find and open the backup folder on your laptop. Then double-click the executable file (Restore.exe), which created during the backup process.

Step 2. Allow access for the program to make changes in the system by clicking Yes.

Step 3. When this program opens, click Next.

Step 4. Select which file types you want to recover and then click Next.

Step 5. A message shows you where the recovery files are stored: C:\System Recovery Files. Then click Next.

Step 6. Wait for the process to be completed. Then click Finish to quit the program.

Way 2: Retrieve lost files with Recoverit Pro

If you didn’t prepare a file backup in advance, you can turn to the powerful data recovery tool – Recoverit Pro. It is able to retrieve a variety of deleted files from all data loss scenarios. More pleasing, it serves you well as HP photo recovery software.

This program works with Windows 10/8/7/Vista/XP. You can follow these steps to learn how to recover deleted photos from HP laptop.

Step 1. Install and launch this program. Click Deleted Files Recovery to start.

Step 2. Select the location where you lost your photos. Then click Start to begin scanning for deleted files.

Step 3. If you can’t find the photos you want after scanning, please use All-Around Recovery to get a deep scan.

Step 4. Select the photos you want to restore and then click Recover to save them on your HP laptop.

Tips: File modified date works well when you need to filter files.

Although files can be recovered without a backup, it takes a long time for scanning and recovering. Sometimes you can’t even recover them, as you edited some new files on your HP laptop before restoring. To prevent files from being lost, regular backups are necessary for users.

The post How to Recover Deleted Files from HP Laptop in Simple Ways-Micro PC Service appeared first on Micro PC Service LLC.